C.8.31.3 Breast X-Ray Detector Macro

C.8.31.3 Breast X-Ray Detector Macro (Current)
Prev	C.8.31 Breast Projection Image Modules	Next

Table C.8.31.3-1 specifies the Attributes of the Breast X-Ray Detector Macro.

Table C.8.31.3-1. Breast X-Ray Detector Macro Attributes

Attribute Name	Tag	Type	Attribute Description
Detector Position Sequence	(0018,9541)	1	A Sequence that describes the geometrical position of the detector. Only a single Item shall be included in this Sequence.
>Detector Primary Angle	(0018,1530)	1C	Angle of the X-Ray beam in the row direction in degrees relative to the normal to the detector plane. Positive values indicate that the X-Ray beam is tilted toward higher numbered columns. Negative values indicate that the X-Ray beam is tilted toward lower numbered columns. See C.8.11.7.1.2. Required if the detector can be moved in the row direction. May be present otherwise.
>Detector Secondary Angle	(0018,1531)	1C	Angle of the X-Ray beam in the column direction in degrees relative to the normal to the detector plane. Positive values indicate that the X-Ray beam is tilted toward lower numbered rows. Negative values indicate that the X-Ray beam is tilted toward higher numbered rows. See C.8.11.7.1.2. Required if the detector can be moved in the column direction. May be present otherwise.

Attribute Name

Tag

Type

Attribute Description

Detector Position Sequence

(0018,9541)

A Sequence that describes the geometrical position of the detector.

Only a single Item shall be included in this Sequence.

>Detector Primary Angle

(0018,1530)

Angle of the X-Ray beam in the row direction in degrees relative to the normal to the detector plane. Positive values indicate that the X-Ray beam is tilted toward higher numbered columns. Negative values indicate that the X-Ray beam is tilted toward lower numbered columns.

See C.8.11.7.1.2.

Required if the detector can be moved in the row direction. May be present otherwise.

>Detector Secondary Angle

(0018,1531)

Angle of the X-Ray beam in the column direction in degrees relative to the normal to the detector plane. Positive values indicate that the X-Ray beam is tilted toward lower numbered rows. Negative values indicate that the X-Ray beam is tilted toward higher numbered rows.

See C.8.11.7.1.2.

Required if the detector can be moved in the column direction. May be present otherwise.

Prev	Up	Next
C.8.31.2 Breast X-Ray Positioner Macro	Home	C.8.31.4 Breast X-Ray Geometry Macro