DICOM PS3.3 2025a - Information Object Definitions |
---|
Table C.4-11. Requested Procedure Module Attributes
Identifier that identifies the Requested Procedure in the Imaging Service Request. |
||
A Sequence that conveys the Requested Procedure of one Procedure Type. |
||
Laterality of body part subject of procedure. Only a single Item shall be included in this Sequence. If present, shall not conflict with any pre-coordinated laterality in Requested Procedure Code Sequence (0032,1064). |
||
Date the Study started, if any previous procedure steps within the same Study have already been performed. |
||
Time the Study started, if any previous procedure steps within the same Study have already been performed. |
||
Uniquely identifies the Studies associated with this SOP Instance. One or more Items shall be included in this Sequence. See Section 10.6.1. |
||
>Include Table 10-11 “SOP Instance Reference Macro Attributes” |
||
Institution-generated administrative description or classification of Requested Procedure. |
||
Mode of transportation of the Patient to the location of examination. |
||
Physical location at which the Requested Procedure is to be performed. |
||
Confidentiality Constraints on the Requested Procedure by the party filling the order. |
||
Names of the physicians, who are intended recipients of results. |
||
Identification of the physicians who are intended recipients of results. One or more Items shall be included in this Sequence. If more than one Item, the number and order shall correspond to the value of Names of Intended Recipients of Results (0040,1010), if present. |
||
>Include Table 10-1 “Person Identification Macro Attributes” |
Placer Order Number / Procedure (0040,1006) and Filler Order Number / Procedure (0040,1007) were previously defined in DICOM. They are now retired (see PS3.3-1998 ).
DICOM PS3.3 2025a - Information Object Definitions |
---|