N.6.2 Configuration of DIMSE Services

N.6.2 Configuration of DIMSE Services (Current)
Prev	N.6 Configuration	Next

The tables in the following subsections show the configuration parameters required for DIMSE Services.

In order to identify whether <product> is an SCP and/or an SCU, the following applies:

SCP: The (Secured) Local Called AET and Remote Calling AET parameters are present.
SCU: The (Secured) Local Calling AET and Remote Called AET parameters are present.

[Use this table template in each supported DIMSE Service section, similar to the example tables provided and provide information as needed for the product implementation. "Local Configuration Parameters" describes parameters for the product described in this DCS, whereas "Remote Configuration Parameters" describes the information needed for this product to interface with a remote system.

Remove rows for any unsupported parameters. For example, if <product> is an SCU only, remove the rows for Called AE Title and Ports in the Local Configuration Parameters part of the table and the Calling AE Title row in the Remote Configuration Parameters part. If <product> is an SCP only, remove the Calling AE Title row in the Local Configuration Parameters part and remove the rows for the Called AE Title, Ports and Host from the Remote Configuration Parameters part.

If your product implementation supports multiple AE Titles for the same service, list all of them in separate rows and describe their use in the "Comments" column.

Local Configuration Parameters - <service name>
Parameter	Configurable	Default Value	Comments
	<<USER SERVICE FIXED>>	[If there is no default, leave blank.]	[Provide comments or Values/ranges if applicable.]
Calling AE Title (SCU)
Called AE Title (SCP)
Port
TLS-Secured Port
<Specific service parameter>
Remote Configuration Parameters - <service name>
[Either document the number of supported remote hosts, e.g <Product> supports configuration of up to <X> remote hosts, or state that there is no limitation other than the ones mandated by the operating system.]
Parameter	Configurable	Default Value	Comments
	<<USER SERVICE FIXED>>	[If there is no default, leave blank.]	[Provide comments or Values/ranges if applicable.]
Calling AE Title (SCU)
Called AE Title (SCP)
Port
TLS-Secured Port
Host
<Specific service parameters>

]

N.6.2.1 Basic Worklist Management Service Configuration

Table N.6-2 lists Worklist Service configuration parameters:

Table N.6-2. Worklist Service Parameters

Parameter	Configurable	Default Value	Comments
Local Configuration Parameters - Worklist Service
[This example shows configuration for an MWL SCU, e.g., a modality.]	<<USER SERVICE FIXED>>	[If there is no default, leave blank.]	[Provide comments or Values/ranges if applicable.]
Calling AE Title (SCU)	SERVICE	WORKLIST_AE
Default Modality type	USER	CR	Used to query the MWL SCP. Possible choices are CR, DX, RF
Default Scheduled Station AE Title	SERVICE		Used to query the remote MWL SCP
Remote Configuration Parameters - Worklist Service
Parameter	Configurable	Default Value	Comments
	<<USER SERVICE FIXED>>	[If there is no default, leave blank.]	[Provide comments or Values/ranges if applicable.]
Called AE Title (SCP)	SERVICE		Can connect up to 3 RIS
Port	SERVICE	104
TLS-Secured Port	FIXED	2762
Host	SERVICE