DICOM PS3.2 2019b - Conformance

C.4.4.2 Parameters

DICOMSRV configuration parameters related to DICOM communications are below. A blank cell under the 'Default Value' heading indicates that there is no default value for the specific configuration attribute.

Table C.4.2-14. Configuration Parameters Table

Parameter

Configurable

Default Value

General Parameters

Time-out waiting for acceptance or rejection Response to an Association Open Request

Yes

30 Seconds

Time-out waiting for response to TCP/IP connect() request.

Yes

15 Seconds

Time-out for waiting for data between TCP/IP packets. (Low-level timeout)

Yes

15 Seconds

Time-out waiting for a response to a DIMSE Request

Yes

30 Seconds

Time-out waiting for the next DIMSE Request

Yes

60 Seconds

Debugging Capabilities

Hex Dump DIMSE Messages

Yes

Off

Hex Dump Association Messages

Yes

Off

TCP/IP Settings

TCP/IP Send Buffer

Yes

65535 Bytes

TCP//IP Receive Buffer

Yes

65535 Bytes

PacketFilter

Yes

On. This option enables running of tcpdump utility from the command line to capture TCP packet headers/contents

DICOMSRV Parameters

Maximum Number of Simultaneous Associations

Yes

20

Maximum Number of Associations to a given device

Yes

3

Maximum PDU size the AE can receive

Yes

65536 Bytes

Maximum PDU size the AE can send

No

The lower of the value above and the max PDU size specified by the Remote AE in the Association Request

Validation of DICOM Service Messages

Yes

Validate messages and log validation errors. Do not automatically return error for all validation errors

Modality Worklist Parameters

Maximum Number of Matches for an MWL Request

Yes

100

Time period after Scheduled Date/Time to leave SPS entries in the SPS Worklist

Yes

2880 min

State of Parent Procedure that causes deletion of child SPS Entries

Yes

PROCEDURE STARTED

Supported Transfer Syntaxes

Yes

Explicit VR Little Endian

Implicit VR Little Endian

Modality Performed Procedure Step Parameters

Generate charges based on supplies specified in MPPS transactions

Yes

Off

Purge Period for MPPS transactions in final state

Yes

30 days

State to automatically set procedures to for a given AE on receipt of matching N-CREATE

Yes

State to automatically set procedures to for a given AE on receipt of matching N-SET COMPLETED

Yes

State to automatically set procedures to for a given AE on receipt of matching N-SET DISCONTINUED

Yes

Flag specifying support for IHE Trauma cases for a given AE

Yes

false

Patient ID Range to be used for Patient Registration for IHE Trauma case

Yes

Default Procedure Code to be used for orders for IHE Trauma cases

Yes

Supported Transfer Syntaxes

Yes

Explicit VR Little Endian

Implicit VR Little Endian


DICOM PS3.2 2019b - Conformance